fasttrack sx4-m s150 raid 5 with fedora 3
Next message: dkarlson_at_yahoo.com: "FC3 runs Interactive Startup EVERY time"
Date: Tue, 5 Apr 2005 21:26:05 +0200
Hi,
I am trying to install a new file server with fedora 3
It detects the sx controller but it shows the 3 drives which are configured
as 1 raid 5 system as 3 seperate drives.
How do I configure Raid 5 with fedora 3?
tnx
lars
Next message: dkarlson_at_yahoo.com: "FC3 runs Interactive Startup EVERY time"
Relevant Pages
- Re: bad blocks on raid5 cause filesystem failure
... It is setup in in RAID 5. ... How could a RAID controller botch this up? ... should be rebuilt on spare drive if available from remaining drives. ... All is fine unless you have double fault. ...
(comp.os.linux.hardware) - Re: Freedos 1.1 Released some days ago
... If you have a SATA-1 controller then there should be win-98 drivers ... If your SATA controller is a SiL 3112/3114 chip then ... RAID requires *two* drives, ...
(comp.os.msdos.misc) - Re: Dell PERC 2/SC Single Channel LVD SCSI RAID Controller
... 2/SC) PCI RAID controller is a high performance intelligent PCI-to-SCSI ... PERC 2/SC is an ideal RAID solution for the internal ... Multiple logical drives/arrays per controller Up to 8 logical drives ...
(uk.adverts.computer) - Re: SATA vs. SCSI, RAID?
... Also this would depend on which controller is ... Well MS's intrinsic SW RAID 1 drivers using typical Intel mobo EIDE ... controllers for ATA or Adaptec SCSI non-RAID cards do very well here. ... But do note that I only mentioned "3x drives ...
(microsoft.public.windows.server.sbs) - Re: Do I have the correct SATA controller installed ?
... My intention is to use the 2 SATA hard drives as stand alone drives, ... I was just concerned I might have choosen the wrong ICH7 controller ... > Youre going about it wrong.First,if not running RAID then only 1 hd must ... >> I selected the 82801GB AHCI controller and Windows continued to install ...
(microsoft.public.windowsxp.hardware) |
|
