Re: Internet set up

From: Lenard (Lenard_at_127.0.0.1)
Date: 05/07/05


Date: Sat, 07 May 2005 18:49:21 GMT

Randy wrote:

> OK I tried to ping and I can't. At this point I would say that my dns
> isn't set up and my gateway settings are incorrect. I found that
> there
> is an update to my router firmware, so I will go do that now. What
> information do I need to set up the gateway and dns?

Check your ethernet configuration file and make sure that your gateway
to the router is set. Some routers for one reason or another do not
supply the information correctly as far as Linux is concerned. The fix
is to manually supply the GATEWAY information. The DNS information
should be automagically created for you.

Sample /etc/sysconfig/network-scripts/ifcfg-eth0 file;

# Realtek|RTL-8139/8139C/8139C+ <--the hardware device
DEVICE=eth0
BOOTPROTO=dhcp
ONBOOT=yes
TYPE=Ethernet
USERCTL=yes
PEERDNS=yes
IPV6INIT=no
GATEWAY=192.168.1.1 <-- your routers internal TCP/IP address here

Sample /etc/resolv.conf file;

; generated by /sbin/dhclient-script
nameserver 63.251.38.131
nameserver 63.251.38.133

-- 
"They that can give up essential liberty to obtain a little temporary
 safety deserve neither liberty nor safety."     -- B. Franklin, 1759


Relevant Pages

  • Re: gateway IP address
    ... than one other node connected to the Ethernet so just having one way ... connecting his PC to the router, ... Ethernet is going to be the "gateway". ... This will show how MAC addresses ...
    (comp.dcom.sys.cisco)
  • Re: Using XP PC as Gateway, add Wireless router, cant share across su
    ... I'm using a spare PC running Windows XP Pro configured as a gateway to allow ... other computers to access the Internet through this PC. ... Things have been running pretty good so I added a wireless router to the mix ...
    (microsoft.public.windowsxp.network_web)
  • Re: Workgroup Client Bridge Configuration
    ... capability for the LAN interface, in any case it only allows one IP to be specified. ... original SOHO-10 routers in service and on my router pile. ... but the gateway is 216.216.216.1, some operating systems just will not ... I mean't the one computah that's going through the Seneo wireless. ...
    (alt.internet.wireless)
  • Re: Workgroup Client Bridge Configuration
    ... original SOHO-10 routers in service and on my router pile. ... do more than about 1Mbit/sec WAN to LAN. ... but the gateway is 216.216.216.1, some operating systems just will not ... The machine at the end of the wireless bridge should be configured the ...
    (alt.internet.wireless)
  • RE: Terminal Server Connecton Mystery
    ... only has one gateway to look at, and thus far has eliminated my problem. ... I was wondering if that might be the problem.The Isp's router, ... I allowed it to perform a windows update run,our connection issue began.The ...
    (microsoft.public.windows.terminal_services)