my removable usb once more

From: Vink (gertjan_at_gershwin.xs4all.nl)
Date: 11/29/03 

Date: Sat, 29 Nov 2003 08:20:15 +0100

I mm looking for a Unix guru or wizard:
guru: a very knowledgable Unix/Linux fellow
wizard: someone who can write device drivers with the cat command, like
cat >driver.c
..
^D
A hacker is also nice, as long as he hates carmageddon

I bought myself a 120GByte usb drive what runs like a champ with the
same called drivers in win2000, and very fast.

Can any of those people help me, to get it running? Should I use the
mknod command, and on what major/minor devices?

Here are the dmesg and /proc/bus/usb/drivers specs:

DMESG--
usb-ohci.c: USB OHCI at membase 0xca84b000, IRQ 10
usb-ohci.c: usb-00:02.3, Silicon Integrated Systems [SiS] 7001 (#2)
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Found IRQ 11 for device 00:02.2
usb-ohci.c: USB OHCI at membase 0xca84d000, IRQ 11
usb-ohci.c: usb-00:02.2, Silicon Integrated Systems [SiS] 7001
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,5), internal journal
hub.c: new USB device 00:02.3-1, assigned address 2
Adding Swap: 136480k swap-space (priority -1)
usb.c: USB device 2 (vend/prod 0xe79/0x1007) is not claimed by any
active driver.
hub.c: new USB device 00:02.2-1, assigned address 2
input0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb2:2.0
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi0 : SCSI emulation for USB Mass Storage devices
   Vendor: Maxtor 6 Model: Y120L0 Rev: YAR4
   Type: Direct-Access ANSI SCSI revision: 02
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
USB Mass Storage support registered.

USB/DEVICES--
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc=118/900 us (13%), #Int= 1, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=ca84d000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c501 Rev= 9.10
S: Manufacturer=Logitech
S: Product=USB Receiver
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 50mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=ca84b000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0e79 ProdID=1007 Rev=11.01
S: Manufacturer=ARCHOS
S: Product=ARCHOS FHD
S: SerialNumber=27050322360525032600000
C:* #Ifs= 1 Cfg#= 2 Atr=c0 MxPwr= 98mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl=32ms

-
mail: Vink <gertjan@gershwin.xs4all.nl>
homepage: http://gershwin.xs4all.nl

please use pgp, my public key is on most key servers
like http://belgium.keyserver.net and http://pgp.mit.edu/
and in my home page, it can be used from the usa as well,
if necessary send your public key.

Relevant Pages