Trouble with cdrom !!

From: Dusty (dusty_at_madaboutcomputers.ws)
Date: 02/15/04

  • Next message: Fred Mulharin: "Re: Create a networkbridge in RH9" 
    Date: Sun, 15 Feb 2004 12:56:47 -0500

    Hello,

    I am having trouble with getting my
    Red Hat 9.0 system to see both my
    cdrom and cdwriter. I am pretty sure I have
    everything setup right but I still can't
    mount my cdrom. MY cdwriter mounts just
    fine. When I try to mount the cdrom I get
    the following errors and then the system locks up.

    Feb 15 09:05:21 eniac kernel: hdb: tray open
    Feb 15 09:05:21 eniac kernel: end_request: I/O error, dev 03:40 (hdb),
    sector 64
    Feb 15 09:05:25 eniac kernel: hdb: tray open
    Feb 15 09:05:25 eniac kernel: end_request: I/O error, dev 03:40 (hdb),
    sector 68
    Feb 15 09:05:28 eniac kernel: hdb: tray open
    Feb 15 09:05:28 eniac kernel: end_request: I/O error, dev 03:40 (hdb),
    sector 72
    Feb 15 09:05:31 eniac kernel: hdb: tray open
    Feb 15 09:05:31 eniac kernel: end_request: I/O error, dev 03:40 (hdb),
    sector 76

    Here are my settings:

    lilo.conf:

    append="root=LABEL=/ hdb=ide-cd hdd=ide-scsi"

    modules.conf:

    options ide-cd ignore=hdb

    alias scd0 sr_mod
    #pre-install ide-scsi modprobe imm # uncomment for some ZIP drives only
    pre-install sg modprobe ide-scsi # load ide-scsi before sg
    pre-install sr_mod modprobe ide-scsi # load ide-scsi before sr_mod
    pre-install ide-scsi modprobe ide-cd # load ide-cd before ide-scsi
    install modprobe sg

    /dev/files:

    lrwxrwxrwx 1 root root 9 Feb 15 12:35 cdrom -> /dev/hdb
    lrwxrwxrwx 1 root root 9 Feb 15 12:35 cdrom1 -> /dev/scd0

    brw-rw---- 1 root disk 3, 64 Jan 30 2003 /dev/hdb

    model:
    SAMSUNG SCR-3232

    Has anyone else had this problem ?? Any help would be appreciated !!

    --dusty

  • Next message: Fred Mulharin: "Re: Create a networkbridge in RH9"

    Relevant Pages

    • Pls help me SCSI-ize my IDE CDROM so K3b can see it
      ... I want both my CD drives to be visible under K3b. ... CDROM and my CDRW to be accessed with the ide-scsi kernel driver. ...
      (comp.os.linux.setup)
    • Pls help me SCSI-ize my IDE CDROM so K3b can use it
      ... I want both my CD drives to be visible under K3b. ... CDROM and my CDRW to be accessed with the ide-scsi kernel driver. ...
      (comp.os.linux.hardware)
    • ide-scsi emulation and modules configuration at
      ... Lsmod shows that after reboot both cdrom and ide-cd modules are running ... "dmesg shows that ise-scsi emulation does ... The only way I can make ide-scsi emulation to work is to disable and ... insmod ide-scsi ...
      (Debian-User)
    • modules.conf syntax for ide-scsi emulation
      ... I'm trying to use ide-scsi emulation with an ide cdrom drive to make ... It does work, but only after I 'modprobe ide-scsi', I can't seem to ...
      (comp.os.linux.misc)
    • ide-scsi question
      ... the ide-scsi emulation. ... pre-install sr_mod modprobe ide-scsi # load ide-scsi before sr_mod ... pre-install ide-scsi modprobe ide-cd # load ide-cd before ide-scsi ...
      (comp.os.linux.misc)