eth0 Not Coming Up
Date: Mon, 21 Mar 2005 19:58:49 -0800
Today I restarted my server to find that it was not responding after 5
minutes. After some investigating, I found that networking was not starting
up. Somehow, the /etc/sysconfig/network file had disapeared. This has been
corrected and now the network service starts successfully along with the lo
interface. However, I cannot seem to get eth0 to come up. By all accounts,
it appears to be coming up.
When I type 'service network restart' it shows:
Bringing up interface etho: [ OK ]
Here is my /etc/sysconfig/network file:
Here is my ifcfg-eth0 file:
These files have not changed for several weeks. Up until now, they have
worked, even after a restart. Can anyone think if any reason why the eth0
interface would not come up?
- Re: Odd Network Problem
... be a network config issue. ... Can you connect from laptop to print ... hitting re ply in the email providers web interface. ... auto eth0 means your system will bring up the interface eth0 ...
- Missconfiguration of ethernet interfaces on reboot
... Each machine has 3 NICs: 2 of them come included in motherboard (one ... other is an Intel e1000 Fiber Network Card attached in a PCI-Express ... tried to asign eth0 a e1000 module, but it couldn't, so it didn't ... result in a good rising of the interface and failed to be up. ...
- Re: [SOLVED!!] Re: can i completely delete and recreate my network interfaces?
... man ifrename ... 08:07.0 Network controller: Broadcom Corporation BCM4318 [AirForce One ... recipe to restore my eth0 interface? ...
- eth0 died on reboot SOLVED
... Turning the computer off isn't enough, I had to unplug it, then restart and whatever the problem was, it is now fixed. ... After I restarted it, eth0 was dead. ... The network card is built into the motherboard. ...
- Re: Internet interface problem
... The selection of the eth0 interface, into which the DSL cable coming ... KNetworkConf ... UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 ...