Re: Could someone translate this?

From: Steve (sjhx_at_lanset.com)
Date: 09/14/03


Date: Sun, 14 Sep 2003 12:38:33 -0700

After the ATZ (reset) command, and before the ATDT (dial)
command, wvdial needs to send a init string to set your modem up
correctly; for example, the protocol fallback methode,
compression mode, error correction, and what type of returned
result codes. In your config file ( /etc/wvdial.conf ) you
should have a line:

INIT2 = 'this is where you put you modem comands'

I can't tell you what modem commands because I don't know what
chipset your modem uses.

SL wrote:
> This is from my message log and might explain why my modem dials and
> connects, but either does nothing, or does it very slowly.
>
> Thanks
>
>
> Sep 14 10:46:47 localhost ifup-ppp: Setting up a new /etc/ppp/peers/ppp0
> config file
>
> Sep 14 10:46:47 localhost ifup-ppp: pppd started for ppp0 on /dev/ttyS0 at
> 57600
>
> Sep 14 10:46:47 localhost kernel: CSLIP: code copyright 1989 Regents of the
> University of California
>
> Sep 14 10:46:47 localhost kernel: PPP generic driver version 2.4.2
>
> Sep 14 10:46:47 localhost pppd[3789]: pppd 2.4.1 started by root, uid 0
>
> Sep 14 10:46:48 localhost wvdial[3813]: WvDial: Internet dialer version 1.53
>
> Sep 14 10:46:48 localhost wvdial[3813]: Initializing modem.
>
> Sep 14 10:46:48 localhost wvdial[3813]: Sending: ATZ
>
> Sep 14 10:46:48 localhost wvdial[3813]: OK
>
> Sep 14 10:46:48 localhost wvdial[3813]: Modem initialized.
>
> Sep 14 10:46:48 localhost wvdial[3813]: Sending: ATDTXXX-XXXX
>
> Sep 14 10:46:48 localhost wvdial[3813]: Waiting for carrier.
>
> Sep 14 10:46:49 localhost wvdial[3813]: ATDTXXX-XXXX
>
> Sep 14 10:47:15 localhost wvdial[3813]: [19]`XXXXXX
>
> Sep 14 10:47:15 localhost wvdial[3813]: CONNECT 57600
>
> Sep 14 10:47:15 localhost wvdial[3813]: [19]c
>
> Sep 14 10:47:15 localhost wvdial[3813]: Carrier detected. Chatmode
> finished.
>
> Sep 14 10:47:15 localhost pppd[3789]: Serial connection established.
>
> Sep 14 10:47:15 localhost pppd[3789]: Using interface ppp0
>
> Sep 14 10:47:15 localhost pppd[3789]: Connect: ppp0 <--> /dev/ttyS0
>
> Sep 14 10:47:15 localhost /etc/hotplug/net.agent: assuming ppp0 is already
> up
>
> Sep 14 10:47:17 localhost pppd[3789]: Remote message: ^@
>
> Sep 14 10:47:17 localhost modprobe: modprobe: Can't locate module
> ppp-compress-21
>
> Sep 14 10:47:17 localhost kernel: PPP Deflate Compression module registered
>
> Sep 14 10:47:17 localhost modprobe: modprobe: Can't locate module
> ppp-compress-21
>
> Sep 14 10:47:18 localhost pppd[3789]: local IP address 65.179.8.28
>
> Sep 14 10:47:18 localhost pppd[3789]: remote IP address 65.179.30.9
>
> Sep 14 10:47:18 localhost pppd[3789]: primary DNS address 207.69.188.187
>
> Sep 14 10:47:18 localhost pppd[3789]: secondary DNS address 207.69.188.186
>
> Sep 14 10:47:18 localhost logger: punching nameserver 207.69.188.187 through
> the firewall
>
> Sep 14 10:47:18 localhost logger: punching nameserver 207.69.188.186 through
> the firewall
>
> Sep 14 10:47:18 localhost su(pam_unix)[3905]: session opened for user root
> by (uid=0)
>
> Sep 14 10:47:18 localhost su(pam_unix)[3905]: session closed for user root
>
> Sep 14 10:49:07 localhost ntpd[3437]: kernel time discipline status change
> 41
>
>



Relevant Pages

  • RE: Sierra Wireless (MC8780) HSDPA speed issue
    ... I have solved the modem hangup issues when using the AT control device ... The problem appears to be the AT&C1 command. ... Three devices appear, ttyUSB0, ttyUSB1, ttyUSB2. ... I have successfully reached average download speeds above 400KB/s. ...
    (Linux-Kernel)
  • trace ip
    ... Ascend digital modem box, his last attack I logged he tried 15 or so ... easy to see from the out side or make the security really LAX on that comp. ... It is all command ...
    (microsoft.public.security)
  • Re: problems with wvdial
    ... AT is a command prefix - assuming that is the modem ... The question - more or less - is, "Why is pppd sending ... to authenticate if it can't identify a specific secret to use. ...
    (comp.os.linux.networking)
  • Re: trace ip
    ... > How can I trace someone trying to hack my ascend digital vpn modem? ... > authentication and is being logged into our RAD logs. ... > to c:\) So it will look like this in command ... Anyway I am not too worried about security ...
    (microsoft.public.security)
  • Re: Modem genius wanted
    ... You really need an AT command set, and to read the thing end to end! ... From my old modem manual ... ... ATV1 Result codes as words <- You probably want this ... Dialling is blind, regardless of dial tone. ...
    (sci.electronics.design)