I have a proliant dl380 server running linux redhat v8. I'm
attempting to change the baud rate on the serial port for remote
console purposes. But, I cannot figure out the usage for the
setserial command. I've them in a few different ways to no avail
Any suggestions are welcome.
RE: Serial port blues ... digital amateur radio on Linux, because I'm curious whether or not the ... Only kernel level drivers are allowed such port access. ... since the 45.45 baudrate is not available in the serial port driver.... You may be confusing the old-style baud rate lookup table (B9600 et ... (Linux-Kernel)
Re: setting baud rate ... that's trying to change your settings on the debug serial port. ... when we have a serial port application we will set it correctly.. ...baud rate issue on my com1 port, When the bios boots my card it ... (microsoft.public.windowsce.platbuilder)
Re: remotely logging in ... >:I'm sorry that i didn't mention the equipment is my own and I'm trying to ... > That won't be "just like" having a remote rack.... > are likely going to want to connect each of your routers and switches... > to a serial port that you can talk to from the service computer. ... (comp.dcom.sys.cisco)
Remote Desktop serial port synchronization ... synchronizing remotely would be to use the serial port... mapping feature of Remote Desktop.... different CE 3.0 mobile devices,...Haverford College, 370 Lancaster Avenue, Haverford, PA, ... (microsoft.public.pocketpc.activesync)
Re: Help with Zilog180 ASCI on COM1 ... > with a 4.608 MHz Oscilator and I am using the ASCI Baud Rate Selection... Set your serial port for some baud rate, ...transmit 8-bit bytes with no parity. ... Copy and paste the source code text into ... (comp.arch.embedded)
