Firewall and trusted devices

From: Stephane M (Stephane_at_M.com)
Date: 05/20/05 

Date: Fri, 20 May 2005 15:46:02 -0400

Hello,

Running Centos 4, I have installed 2 ethernet Cards,
- one for our Network
- the second one, for Internet.

I wish NO forwarding ... just keep separate the 2 network
( I am using our network, to update files for our FTP site....)

I just edit
I did configure....
SYstem settings -> Network Eth0 ->
        Eth0 ; 'Outside' Internet
        Eth1 ; Our network

Then
System setting -> Security levels
AND for trust devices I did select:
FTP, HTTP and Eth1

When the Firewall starts, Eth1 is not trusted at all. When I tried to
connect to my (samba) share 'FTP' the access is rejected !!
If I disable the Firewall, I can Map this drive...

DO you know the way to put the Firewall on Eth0 and leave alone my Eth1 ?

Thanks for your help

Steph

Relevant Pages

  • Any help with this?
    ... What I was doing is one of the linux servers has 2 network cards (Eth0 ... and eth1) Eth0 is connected to the firewall. ... I was advised to try and put eth1 on a seperate subnet. ...
    (alt.os.linux)
  • Re: Cannot Access External http sites
    ... Pc can access network resources on the local lan and internet ... DNS queries work fine and so does FTP. ... This sounds very much like a firewall problem. ...
    (microsoft.public.windowsxp.network_web)
  • RE: ftp not working after security update .#10054
    ... Do the issue occurs when you visit specific FTP site or all FTP sites? ... What your network topology? ... the SBS server separates the network into two ... 825763 How to configure Internet access in Windows Small Business Server ...
    (microsoft.public.windows.server.sbs)
  • Re: 500 Access is Denied
    ... this is not ftp mode issue as you are getting 550 access denied. ... Is there a firewall or IP address restrictions on the server itself? ... internal network IP address bound to the network card on your SBS server ... From outside my firewall I can go to my external website via FTP client, ...
    (microsoft.public.inetserver.iis.ftp)
  • Re: Atari St/Lantronix
    ... I was thinking I could upload files to a ftp server from my st but How do I get it to connect with the Lantronx box. ... MSS1 looks more like a terminal server over the serial port than a UDS-10 ... configure its network parameters as described in the Lantronix manual; ... (It will probably have to be a host on your local network, ...
    (comp.sys.atari.st.tech)