64 Bit check

From: BN (BN_at_BN.COMO)
Date: 09/27/05


Date: Tue, 27 Sep 2005 12:57:05 -0400

How can one check to see if you are running a 64-bit kernel on FC4 to
see whether to install the 64-bit version or Oracle or the 32-bit
version Oracle.

Is it possible that a 64 bit kernel can run on anything other than an
Opteron or Itanium in the x86 line?



Relevant Pages

  • Re: FC4 Base installed -- no dhcp
    ... just re- install from the standard FC4 Install CDs, ... Also, FC4 uses the 2.4 kernel, IIRC. ... if you develop your compiler ...
    (comp.os.linux.setup)
  • FC5/FC4 Update Problem With Newer Kernels
    ... I updated one of my home systems from FC4 to FC5 without a hitch. ... I tar'ed and copied the /home file system to another system so my wife can continuing working and proceeded to do a clean install of FC5. ... I decided to try a FC4 install which went just fine - everything was detected just fine and FirstBoot setup went smoothly running the base 2.6.11-1.1369_FC4 kernel. ...
    (Fedora)
  • Re: initrd failure with kernel-2.6.16-1.2069_FC5.i686
    ... can't boot my FC4 now, when it start, after loading ... No dep file found for kernel 2.6.16-1.2096_FC5 ... I imagine that something similar is happening to you, yordy. ... happens when I try to install the package (this is changed behaviour; ...
    (Fedora)
  • Re: Determining what is causing load when server is idle.
    ... If you still have this issue, try booting on a uniprocessor kernel or boot with the 'noapic' option and see if you face the symptom or your system boots properly. ... [root@localhost oracle]# cat /proc/interrupts ... md: autorun ... ... IO-APIC-edge timer on the DL140G2 system. ...
    (RedHat)
  • [HPADM] Summary: Right value to tune/set maxusers & nfile (Error 23 File table overflow)
    ... You can adjust nfile separately without adjusting maxusers. ... Also look at the Oracle ... Is kernel file affected and where's the location /name of the kernel file. ...
    (HP-UX-Admin)