I have 2 nics and kickstart keeps asking for which interface. what do I have
to put in my ks.cfg file for it to use eth0 and not ask anymore? also it
asks for which hard drive since I have /dev/sda1 and /dev/sdb1
Missconfiguration of ethernet interfaces on reboot ... Each machine has 3 NICs: 2 of them come included in motherboard (one ... other is an Intel e1000 Fiber Network Card attached in a PCI-Express ... tried to asign eth0 a e1000 module, but it couldn't, so it didn't ... result in a good rising of the interface and failed to be up. ... (comp.os.linux.networking)
Re: Proper behavior of dhcp on linux ... > the NICs to serve up IP addresses dynamically using dhcpd.... No subnet declaration for eth0. ... to which interface eth0 is attached. ... (comp.os.linux.networking)
Intel Gigabit NIC (2.6.5 -> 2.6.10) Bug(?) Found ... Something in the kernel changed regarding the Intel e1000 driver from ... Normally, I never really looked at my ifconfig eth0, eth1 etc because I ... with GigE nics, on one there are very few if any errors on the nic ...ethtool and installed it and did a basic query for network setting ... (Linux-Kernel)
Re: MultiHomed Workstation - Which NIC is being used? ... Regardless of which interface received... the same routing rules apply for return traffic. ... >> the subnet mask.... >> load balancing of multiple NICs and default gateways. ... (microsoft.public.win2000.networking)
